The woody biomass to be used will need to be sized as per the specification of the specific rating of Gasifier model and the moisture content will need to be less than 20% in general.
Key Features at a Glance
Ankur Scientific has a long experience in designing Boilers and getting the same manufactured to the best world standards.
Listed below are the strengths we bring to the table:
Mechanical Design as per ASME SECTION 1 or IBR or any required code under third party inspection (like Bureau Veritas or TUV).
Manufacturing, Testing & Inspection as per IBR, ASME or under best Engineering practice.
Material as per ASTM/DIN/IS/BS standards
Special designs available for Jute bags, Cloth, Low Calorific Value Biomass, High Moisture Biomass (Up to 60%)
Choice & Selection of different grates like Fluidised, Bubbling, Reciprocating or Travelling grate
Highest Combustion Efficiency and overall Efficiency of the Boiler
In-house Thermal design and Heat Transfer area calculation based on latest Engineering practice, performance and formulae.
Distribution of Heat transfer area & fixing boiler geometry & construction based on nature of fuel.
Automation & no back-fire
What is Producer Gas?
Ankur Scientific offers a completely new process for gasifying coal. The systems offered use a Downdraft process instead of the conventional updraft process. The updraft process (as is used) is one where the coal is fed into the gasifier from the top and the gas is also taken out from top. This leads to the gas entraining a lot of tar along with it as the gas needs to pass through the Pyrolysis zone which is where the tars come out. In the downdraft process on the other hand, the coal is fed from the top while the gas generated is taken out from the bottom. This leads to the gas being almost tar free.
